High temperature applications needs up to 250℃ such as dipping and melting experiment with silicone oil
Main Specifications
▶Temp. Range : ambient +10℃ ~250℃
▶Controller : Digital PID Control
▶Accuracy : ± 1.5℃
▶Uniformity : ± 3.0℃
▶Heating Type : Incoloy immersed heater
▶Capacity : 10 / 20 / 33 Liters
High Temp. Applications
Direct heating by immersed incoloy heater provides fast heating up to maximum 250℃
Maintain ± 1.5℃ accuracy and ± 3.0℃ uniformity
Digital PID Controller enables 0.1℃ resolution
Over Temperature Protection, Alarm, Timer, Auto-tuning, in-built temperature calibration
Convenience & Safety
1.6 mm thick stainless steel 304 bath with 50mm thick ceramic wool insulation
Perforated stainless steel heater cover protects heater and sensor from damage
Hydraulic over temperature cut-off and ELB for safety
Including stainless steel lid with silicone packing steam ventilation hole on the lid for safety
Specifications & Ordering Information
Cat.No |
Description |
Size |
JSOB-100T |
Incoly immersed heater |
10L |
JSOB-200T |
Incoly immersed heater |
20L |
JSOB-330T |
Incoly immersed heater |
33L |
Model |
JSOB-100T |
JSOB200T |
JSOB-330T |
Bath Capacity |
10L |
20L |
33L |
Tempperature |
Heating Type |
Direct heating by immersed stainless steel incoloy heater |
Range |
ambient +10℃ ~ 250℃ |
Accuracy |
±1.5℃ at 120℃ |
Uniformity |
±3.0 ℃ at 120℃ |
Control |
Main Controller |
Digital PID controller |
Wait on/off Timer |
mm:ss / hh:mm / Continuous Selectable |
Sensor |
Pt 100 Ω |
Safety Device |
Tempperature |
Hydraulic Over Temperature Protection |
|
Electrical |
CG Fuse |
Dimensions W*D*H mm |
Inner |
300*220*170 |
400*300*170 |
430*300*260 |
Usable |
300*220*130 |
400*300*130 |
430*300*220 |
Outer |
550*310*330 |
650*390*330 |
680*390*420 |
Material |
Bath |
1.6Gauge Stainless Steel Polished(SUS304) |
External |
Steel 1T with Epoxy Powder Coating |
Lid |
Stainless steel lid with foamed silicone packing |
Drain |
Ball check valve |
Electrical Requirement |
120 VAC 60 Hz or 220 VAC 50/60 Hz | |